非水系壓入泥槳屬于樹脂類泥槳，主要成分為特級鋁礬土，其它成分為C, sic和少量微膨脹材料。用于填充工業窯爐中的孔隙部位，如高爐的鐵殼和冷卻壁之間的空隙，以及用于風口，鐵口，煤氣串漏，熱風爐本體或管道高溫部位的修復。
該非水系壓入泥槳選材合理、施工方便.其流動性、填充性等十分優良。高溫穩定基本無收縮，固化時間短，能有效的延長工業窯爐的使用壽命提高生產效率。
Non-aqueous pressed mud propellers are resin mud propellers. The main component is super bauxite. The other components are C, sic and less.The least expanded material. It is used to fill the pores in industrial kiln. For example, the gap between the iron shell and the cooling wall of the blast furnace.And when it is used to produce air leaks and the iron shell burns red. Use the press into the bucket. Press into the pores in the furnace.Observe that the paddle fills the entire pore area. The pressed mud paddle has reasonable material selection and convenient construction. Its fluidity and filling property Very good properties, high temperature stability, basically no shrinkage, short curing time, can effectively extend the service life of industrial kiln Increase productivity.
|
項目 |
保證值 |
可能值 |
|
Al2O3% |
＞55 |
60 |
|
體積密度（g/cm3） |
＞2.0 |
2.1 |
|
耐壓強度(Mpa) |
＞4 |
6 |
|
抗折強度（Mpa） |
＞0.5 |
0.8 |
|
耐火度（℃） |
＞1790 |
1790 |
|
重燒線變化%（1200℃，3h）% |
＜0.5 |
0.3 |